Description

Wireless doorbell with Flashing Lights and ringtones

Designed for Hearing impaired, special needs or Noisy Environments

Wireless doorbell with Flashing Lights and ringtones has do not disturb option available. It has built-in 52 different ringtones, adjustable volume controls and preset mode. Operating maximum distance in an open area is 200m. Environment dictates the real operational distance.

Power supply	AC 110V to AC220V 50Hz/60Hz	12v Alkaline Battery
Wireless Range	Max 1000ft/300m in open air	Max 1000ft/300m in open air
RF Frequency	433Mhz	433Mhz
Volume level in dB	110dB Max.	—
Number of ringtones	50	—
Expandable capacity	4	4
Power consumption	Less than 0.3Watt	Less than 10mW
Waterproofing	Indoor use	IP44/IP55
Working temperature	-20°C to +50◦C	-20C° to +50◦C

To help hearing impaired, Wireless doorbell with Flashing Lights and ringtones can Flash lights and ring at the same time. Or it can just flash-lights for a set peirod of time. Or it can just ring without flashing lights. Great for Hearing Impaired, special needs or Noisy Environments.

Wireless doorbell with Flashing Lights and ringtones is a plug & play device. Easily place outdoor transmitter or push button using supplied two sided tape or with the supplied screws. Wireless outdoor push button comes with the long lasting battery.

Indoorbell or receiver is an AC plug-in device. Plug-in wireless doorbell receiver unit to a standard AC outlet. Variable outlet types are available like US, UK, EU types plug.

Wireless doorbell with Flashing light and sound is great for Noisy Environments.

Wireless doorbell with Flashing Lights and ringtones works with multiple receivers. For example, you can have one indoorbell in the Basement, one in the main floor and one in the upper floor. All of them will work using one outdoorbell or transmitter or multiple outdoor transmitter.

You can also set different ringtones for different doors. For example, frontdoor can trigger one set of ringtones and backdoor can trigger a different set of ringtones to allow identify the visitors location.

How to pair outdoor transmitter with indoor receiver, read step by step

Power indoor receiver and outdoorbell placing them close to each other for pairing. After pairing is successful when you disconnect indoorbell from power outlet, pairing stays in the memory.

1. Select your favorite ringtones by pressing the Music button.
2. Press and hold volume button until you hear a sound and LED light starts flashing – release button
3. Press dbell call button quickly while chime is in setup mode
Setup time is only 5 seconds to avoid interference
Press dbell ‘call’ button to test. If indoorbell is paired, it will ring. Once paired you can move it to your desired location.

See video on how to pair indoorbell or how to change ringetones

Some of the Built-in Ringtones are: